Ronix Eight.3 Wakesurf Shaper, X-Large Size
$569.99
FREE Shipping
Estimated delivery in 5-7 days
Estimated delivery in 5-7 days
- This item is currently not available
- Delivery to Change Address
- Delivery Fee Details
This item is excluded from all discounts and promotions.
Minimum order quantity of
1
Maximum order quantity of
100
Must purchase in increments of
1
Shipping Restrictions
This item cannot be shipped internationally.
Return Policy
We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment.
Features
Turn your wakes into swells with the hottest product to hit wakesurfing! This device is easily mounted to the lower/back point of the starboard or port side of your boat hull to create a premier surf wake on either side. This game changer means you no longer have to weight your boat unevenly. Instead of filling and draining port and starboard bags, now you can just keep it all in the center. Built-in handle makes it is easy to move the shaper to either side of your boat. Best when paired with a loaded ballast system. Comes complete with Wakesurf Shaper, 2 adjustable shims, and 4 adhesive fastener strips that attach to the boat, instructional USB, and an owner's manual.
New Design
The Shaper design has been improved with more concave through the center of the Shaper and a greater, more defined leading edge. The result is a more effective job of diverting a column of water, thus creating less drag on the boat with improved fuel efficiency. This design is great for the surfer that wants the biggest inboard swell.
X-Large Size Dimensions
The X-Large Wakesurf Shaper gives the biggest, cleanest wake regardless of the size of your boat. If your boat has enough room to apply the 19.5" long running surface using our shims, there is no reason not to use the XL version.
• Boat Surface Length: 19.5"
• Water Surface Length: 26"
• Height: 12.5"
• Depth: 9"
Shim Options
The shim is a simple attachment between the Wakesurf Shaper and the boat's hull. Every hull shape is different. Some are mostly flat and don't require a shim. Others have a step hull and require a 1" shim. Still other boats have a more pronounced step and need a 2" shim, while in some cases you might need both shims to make a 3" gap between the hull and your Wakesurf Shaper. For installation, we recommend the Wakesurf Shaper is 80% submerged when the boat is properly weighted and as close to the stern as your hull will allow.
Wakesurf Shaper Placement
The adhesive fastener strips that attach to the boat are intentionally 6" longer than the Wakesurf Shaper. This allows for further adjustment toward the bow or the stern of the boat, greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper and deeper. When closer toward the bow, the wake gets a longer sweet spot.
New Design
The Shaper design has been improved with more concave through the center of the Shaper and a greater, more defined leading edge. The result is a more effective job of diverting a column of water, thus creating less drag on the boat with improved fuel efficiency. This design is great for the surfer that wants the biggest inboard swell.
X-Large Size Dimensions
The X-Large Wakesurf Shaper gives the biggest, cleanest wake regardless of the size of your boat. If your boat has enough room to apply the 19.5" long running surface using our shims, there is no reason not to use the XL version.
• Boat Surface Length: 19.5"
• Water Surface Length: 26"
• Height: 12.5"
• Depth: 9"
Shim Options
The shim is a simple attachment between the Wakesurf Shaper and the boat's hull. Every hull shape is different. Some are mostly flat and don't require a shim. Others have a step hull and require a 1" shim. Still other boats have a more pronounced step and need a 2" shim, while in some cases you might need both shims to make a 3" gap between the hull and your Wakesurf Shaper. For installation, we recommend the Wakesurf Shaper is 80% submerged when the boat is properly weighted and as close to the stern as your hull will allow.
Wakesurf Shaper Placement
The adhesive fastener strips that attach to the boat are intentionally 6" longer than the Wakesurf Shaper. This allows for further adjustment toward the bow or the stern of the boat, greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper and deeper. When closer toward the bow, the wake gets a longer sweet spot.
- Mounts to your boat to create big swells
- Reduces need for weighting your boat unevenly
- Easily moves from port to starboard side
- Best when paired with a loaded ballast system
- Includes Shaper, shims, and fastener strips
Specs
Unit Weight
26.00 lb
Brand
Ronix
MFG Part No.
177600
800-700-1366
